Virtual Training

K&M Technology Group is excited to announce its virtual training offering for the second half of 2021. We have put a lot of effort into coming up with a format that is a good mix of being flexible, interactive, capable of retaining the attendees to ensure it is valuable time spent for everyone that chooses to attend our training.

Just in 2020-2021 over 250 students have attended our virtual classes!

Who should attend:

All Engineering and Execution Staff, particularly those with influence on the operation including: Drilling Engineer, Engineering Managers, Drilling Supervisors, Drilling Superintendents, Drilling Operations Managers, Directional Drillers, Mud Engineers, Service Company personnel involved in planned and execution, key Rig Contractor personnel etc.

Methodology

Our training will be a mix of recorded training material that can be viewed at the attendee’s own time and pace followed by shorter instructor let training to cover move advanced subjects. On the same week participants have the option to select the 3-Day Standard training or the 5-Day Advanced training that covers additional complex topics. In the week prior to the instructor led training there will be an instructor led introductory section with all attendees. Then all attendees will be given access to videos that cover basic concepts.

The attendees must view the videos and submit answers to quizzes to demonstrate that all attendees are at an equal minimal level of knowledge prior to proceeding with the instructor led training.

The instructor led training will be two to three short sections (~2 hours each) that will cover more advanced topics and topics that normally result in more discussions in our normal instructor led training.

Part 1

Activity: Instructor-Led Introduction

Effort: 2-3 Hours

Part 2

Activity: Web Based Self-Paced Study (1 week for Self Study)

Effort: 3-Day Standard Course: ~7 hours  5-Day Advanced Course: ~16 hours

Part 3

Activity: Virtual Instructor-Led Training (3 Day or  5 Day)

Effort: Two to three short sections per day (~2 hours each)

Key Learning Objectives

  • What's different about ERD well design and technology
  • Torque, Drag, Buckling Fundamentals
  • Hydraulics Fundamentals
  • Hole Cleaning
  • Tripping and Backreaming
  • Hole Condition Monitoring and Management
  • Fundamentals of Wellbore Instability
  • How to Prevent Stuck Pipe Events
  • How to ensure casing and liners reach their intended setting depths with competent cement jobs
  • How to use torque, drag and hydraulic simulators to better design wells and evaluate hole condition while drilling the completing the well
  • How alterations to one section of the well can improve or reduce the chance of successfully completing the entire well.

In in the 5-Day Advanced Course, during the Well Design and Rig Sizing Section, a case study will be shared where a well design is reviewed, limitations identified, and solutions are proposed to maximize the probability of completing the well with minimum down time.

Global Footprint

continents with wellsites

3,004,800m

K&M Executed Footage

7,581

Students

10,120

Training Hours

kmtoffices

Price and Registration:

3-Day ERD and Complex Well Design and Execution Training

5-Day ERD and Complex Well Design and Execution Training

2250 USD + (VAT where applicable)

3750 USD (VAT where applicable)

For registration:

Register in K&M’s learning platform  https://kmtechnology.teachable.com/courses

Alternative, contact us filling up the form below

Do You Have Questions About VIRTUAL AND IN-PERSON Training Sessions? Contact Us.

  • This field is for validation purposes and should be left unchanged.

Locations:

US Office:
Houston, TX, U.S.A
480 Wildwood Forest Drive, Suite 440
The Woodlands TX 77380
Phone: (281) 298-6900
Fax: (281) 298-6875

UK Office:
8, Kirkton Av,
Dyce Aberdeen
Phone:+44 7881 676325

UAE Office:
Abu Dhabi, U.A.E.
28th Floor Sky Tower, Al Reem Island
P.O. Box 21
Abu Dhabi
Phone: +971 261 017 74

RUSSIA Office:
Moscow, Russia
Leningradskoye shosse,
16 A Bld 3, 125171
Moscow, Russia
Phone: +7 910 481 1648

Scroll to Top